top of page
Our Projects
US Coast Guard ~ Grand Isle, LA ~ 2025
• Remove existing HVAC system components—including the AC condenser, evaporator, supply ducting, insulation, and fan coil unit—from the southwest wing of the UPH building.
• Install new 24-gauge insulated galvanized sheet metal for the supply ductwork plenum.
• Install a new fan coil unit with a single-stage, 4-way multipoise condensing gas furnace and a 5-ton evaporator A-coil, reconnecting the outside air supply duct.
• Install a new 5-ton, up to 15 SEER2 residential AC condenser unit on a grated platform outside the utility room.
• Install new 24-gauge insulated galvanized sheet metal for the supply ductwork plenum.
• Install a new fan coil unit with a single-stage, 4-way multipoise condensing gas furnace and a 5-ton evaporator A-coil, reconnecting the outside air supply duct.
• Install a new 5-ton, up to 15 SEER2 residential AC condenser unit on a grated platform outside the utility room.
Headquarters by Nice Guys ~ New Orleans, LA ~ 2024
• Remove and dispose of existing HVAC systems.
• Balance airflow and perform system commissioning.
• Conduct system pressure testing and code inspections.
• Replace outdated wiring, panels, and lighting systems.
• Install new panels, breakers, emergency backup systems, and surge protection.
• Install LED lighting, outlets, and smart-switch configurations.
• Meet ADA standards and drainage requirements.
• Install mechanical systems such as ventilation fans, motorized dampers, louvers, pumps, valves, and compressors.
• Include duct supports, vibration isolators, and mechanical controls.
• Test and calibrate all mechanical components per specifications.
• Install wiring infrastructure and data cabling for CCTV systems.
• Mount and connect indoor/outdoor surveillance cameras, NVRs/DVRs, motion sensors, and access control systems.
• Program remote monitoring and backup storage.
• Conduct training for onsite staff and test full operational functionality.
• Fully operational HVAC, mechanical, plumbing, electrical, and surveillance systems.
• Final inspection reports and certificate of occupancy/approvals.
• Warranty documentation and post-installation support plan.
• Maintain post renovations.
• Balance airflow and perform system commissioning.
• Conduct system pressure testing and code inspections.
• Replace outdated wiring, panels, and lighting systems.
• Install new panels, breakers, emergency backup systems, and surge protection.
• Install LED lighting, outlets, and smart-switch configurations.
• Meet ADA standards and drainage requirements.
• Install mechanical systems such as ventilation fans, motorized dampers, louvers, pumps, valves, and compressors.
• Include duct supports, vibration isolators, and mechanical controls.
• Test and calibrate all mechanical components per specifications.
• Install wiring infrastructure and data cabling for CCTV systems.
• Mount and connect indoor/outdoor surveillance cameras, NVRs/DVRs, motion sensors, and access control systems.
• Program remote monitoring and backup storage.
• Conduct training for onsite staff and test full operational functionality.
• Fully operational HVAC, mechanical, plumbing, electrical, and surveillance systems.
• Final inspection reports and certificate of occupancy/approvals.
• Warranty documentation and post-installation support plan.
• Maintain post renovations.
Empire Orleans ~ New Orleans, LA ~ 2022
• Remove and dispose of existing HVAC systems.
• Install high-efficiency fan coil units, ductwork, condensers, thermostats, and air handlers.
• Balance airflow and perform system commissioning.
• Install water lines, sewer systems, drains, fixtures, and safety valves.
• Conduct system pressure testing and code inspections.
• Replace outdated wiring, panels, and lighting systems.
• Install new panels, breakers, emergency backup systems, and surge protection.
• Install LED lighting, outlets, and smart-switch configurations.
• Demo and pour new structural and flatwork concrete (slabs, curbs, sidewalks).
• Install proper formwork, reinforcement, and finish coatings as needed.
• Meet ADA standards and drainage requirements.
• Install mechanical systems such as ventilation fans, motorized dampers, louvers, pumps, valves, and compressors.
• Include duct supports, vibration isolators, and mechanical controls.
• Test and calibrate all mechanical components per specifications.
• Install wiring infrastructure and data cabling for CCTV systems.
• Mount and connect indoor/outdoor surveillance cameras, NVRs/DVRs, motion sensors, and access control systems.
• Program remote monitoring and backup storage.
• Conduct training for onsite staff and test full operational functionality.
• Fully operational HVAC, mechanical, plumbing, electrical, concrete, and surveillance systems.
• As-built drawings, system diagrams, and manuals.
• Final inspection reports and certificate of occupancy/approvals.
• Warranty documentation and post-installation support plan.
• Maintain post renovations.
• Install high-efficiency fan coil units, ductwork, condensers, thermostats, and air handlers.
• Balance airflow and perform system commissioning.
• Install water lines, sewer systems, drains, fixtures, and safety valves.
• Conduct system pressure testing and code inspections.
• Replace outdated wiring, panels, and lighting systems.
• Install new panels, breakers, emergency backup systems, and surge protection.
• Install LED lighting, outlets, and smart-switch configurations.
• Demo and pour new structural and flatwork concrete (slabs, curbs, sidewalks).
• Install proper formwork, reinforcement, and finish coatings as needed.
• Meet ADA standards and drainage requirements.
• Install mechanical systems such as ventilation fans, motorized dampers, louvers, pumps, valves, and compressors.
• Include duct supports, vibration isolators, and mechanical controls.
• Test and calibrate all mechanical components per specifications.
• Install wiring infrastructure and data cabling for CCTV systems.
• Mount and connect indoor/outdoor surveillance cameras, NVRs/DVRs, motion sensors, and access control systems.
• Program remote monitoring and backup storage.
• Conduct training for onsite staff and test full operational functionality.
• Fully operational HVAC, mechanical, plumbing, electrical, concrete, and surveillance systems.
• As-built drawings, system diagrams, and manuals.
• Final inspection reports and certificate of occupancy/approvals.
• Warranty documentation and post-installation support plan.
• Maintain post renovations.
Legacy Apartments ~ Destrehan, LA ~ 2017
• Site clearing and grubbing
• Grading and excavation
• Trenching and forming
• Footings and slab-on-grade or crawlspace (as per plans)
• Reinforcing steel installation
• Concrete pouring, curing, and finishing
• Wood or steel structural framing
• Floor and roof trusses/rafters installation
• Sheathing (walls and roof)
• Blocking, bracing, and tie-downs
• Window and exterior door rough-ins
• Roof underlayment and flashing
• Shingle, metal, or tile installation (per plans)
• Gutters and downspouts
• Roof vents and penetrations
• Exterior trim and moldings
• Painting or weatherproofing
• Installation of windows and exterior doors
• Installation of ductwork
• Furnaces and air conditioning units
• Thermostat and ventilation systems
• Rough-in and finish plumbing
• Sewer and water service connection
• Fixtures, faucets, tubs, and water heaters
• Service panel and breakers
• Rough-in and finish electrical wiring
• Receptacles, switches, lighting, and smoke detectors
• Final inspection and code compliance
• Wall and ceiling insulation (as per energy code)
• Soundproofing (if applicable)
• Drywall hanging, taping, and finishing
• Interior painting and wall treatments
• Trim, doors, baseboards, and casings
• Cabinetry installation
• Countertops and backsplashes
• Flooring (tile, hardwood)
• Closet shelving and hardware
• Kitchen and bath appliance installation
• Plumbing fixtures (sinks, toilets, etc.)
• Lighting and ceiling fans
• Security systems
• Landscaping and sod
• Driveway, sidewalks, and patios
• Final grading and drainage
• Exterior lighting
• Coordination of required building inspections
• Punch list creation and resolution
• Final cleaning and debris removal
• Certificate of Occupancy
• Walkthrough and turnover package
• Grading and excavation
• Trenching and forming
• Footings and slab-on-grade or crawlspace (as per plans)
• Reinforcing steel installation
• Concrete pouring, curing, and finishing
• Wood or steel structural framing
• Floor and roof trusses/rafters installation
• Sheathing (walls and roof)
• Blocking, bracing, and tie-downs
• Window and exterior door rough-ins
• Roof underlayment and flashing
• Shingle, metal, or tile installation (per plans)
• Gutters and downspouts
• Roof vents and penetrations
• Exterior trim and moldings
• Painting or weatherproofing
• Installation of windows and exterior doors
• Installation of ductwork
• Furnaces and air conditioning units
• Thermostat and ventilation systems
• Rough-in and finish plumbing
• Sewer and water service connection
• Fixtures, faucets, tubs, and water heaters
• Service panel and breakers
• Rough-in and finish electrical wiring
• Receptacles, switches, lighting, and smoke detectors
• Final inspection and code compliance
• Wall and ceiling insulation (as per energy code)
• Soundproofing (if applicable)
• Drywall hanging, taping, and finishing
• Interior painting and wall treatments
• Trim, doors, baseboards, and casings
• Cabinetry installation
• Countertops and backsplashes
• Flooring (tile, hardwood)
• Closet shelving and hardware
• Kitchen and bath appliance installation
• Plumbing fixtures (sinks, toilets, etc.)
• Lighting and ceiling fans
• Security systems
• Landscaping and sod
• Driveway, sidewalks, and patios
• Final grading and drainage
• Exterior lighting
• Coordination of required building inspections
• Punch list creation and resolution
• Final cleaning and debris removal
• Certificate of Occupancy
• Walkthrough and turnover package
bottom of page